DP-15FPH DP-15 Series Pump
$613.85
Availability:
In stock
SKU
853721
1/2" FLUID PORTS
DP-15 series 1/2" AODD pumps provide a maximum flow rate of 7.4 GPM and are available in Polypropylene and Groundable Acetal.
We offer a wide selection of diaphragm materials that cover a variety of applications.
The NDP series pumps utilize a C-Spool.
What separates Yamada from the rest of the pack is our air valve technology. Yamada NDP series pumps use a completely non-lubricated main air valve and independent pilot mechanisms to control the air logic.
As compressed air enters the pump, it is directed via the main air valve to one side or the other, depending upon the starting position of the c-spool. As the air enters the chamber, it forces the diaphragm outward. This outward momentum forces liquid out of the discharge ball valve and loads the opposite inlet ball valve. As the diaphragm travels outward, the connected diaphragm on the opposite side is pulling the diaphragm inward.
When it travels a full stroke, it will contact the pilot valve, depressing it and breaking the seal to open an exhaust port.
The open port allows the compressed air to the exhaust from the back side of the air valve. The pressure drop produces a shift of the main air valve. This motion simply repeats on the other side.
DP-15 series 1/2" AODD pumps provide a maximum flow rate of 7.4 GPM and are available in Polypropylene and Groundable Acetal.
We offer a wide selection of diaphragm materials that cover a variety of applications.
The NDP series pumps utilize a C-Spool.
What separates Yamada from the rest of the pack is our air valve technology. Yamada NDP series pumps use a completely non-lubricated main air valve and independent pilot mechanisms to control the air logic.
As compressed air enters the pump, it is directed via the main air valve to one side or the other, depending upon the starting position of the c-spool. As the air enters the chamber, it forces the diaphragm outward. This outward momentum forces liquid out of the discharge ball valve and loads the opposite inlet ball valve. As the diaphragm travels outward, the connected diaphragm on the opposite side is pulling the diaphragm inward.
When it travels a full stroke, it will contact the pilot valve, depressing it and breaking the seal to open an exhaust port.
The open port allows the compressed air to the exhaust from the back side of the air valve. The pressure drop produces a shift of the main air valve. This motion simply repeats on the other side.
| UOM | EA |
|---|---|
| Diameter | 1/2" |
| Diaphragm Material | Hytrel |
| FDA Compliant | No |
| Flow Rate | 7.4 GPM |
| Brand | Yamada |
| Material | Polypropylene |
| Series | DP-15 |
| Returnable | No |
WARNING: This product can expose you to chemicals which are known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.p65warnings.ca.gov